Skip to product information
  • Vetonek Zapatero apilable roble artesanal 89,5x30x40 cm

Stackable craft oak shoys 89.5x30x40 cm

56,67 €
56,67 € 63,78 €
You save 11% (7,11 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Zapatero practical is designed to adapt to its storage needs and improve the general aesthetics of your home. Stable and durable material: engineering wood is a lasting and stable material with a smooth surface that is resistant to moisture, deformation and breakage, which makes it a reliable option for a variety of projects. Zapatero works very well on its own, but you can also stack with additional units to maximize vertical storage space. Whether you are starting with one or planning to expand it, this cabinet facilitates adaptation to the growing storage needs. Amplio Storage space: With multiple storage compartments, the shelf offers a wide space to store its shoes. Each section is designed to accommodate several shoe styles, maintaining its well -organized and easily accessible footwear. Versatile use: the storage shelf goes beyond footwear. Its versatile design supports several storage solutions, from boxes and gloves to accessories. When placed at the entrance, you can comfortably place the bags on the surface to facilitate access. In addition, it fits perfectly in your closet to meet various storage needs. Facil of maintaining: thanks to its smooth surface, the closet is easy to clean with a wet cloth and requires less maintenance.

  • Color: oak artisan
  • Material: Engineering Wood
  • Dimensions: 89.5 x 30 x 40 cm (wide x high x high)
  • Total weight capacity (each): 40 kg
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.