Skip to product information
  • Vetonek Piscina con estructura Steel Pro 366x76 cm

Steel Pro 366x76 cm structure pool

158,54 €
158,54 € 178,44 €
You save 11% (19,90 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

You will have a lot of fun with the family and friends in the Steel Pro pool in Vetonek, whose round shape provides more space to swim and play. This high pool combines durability and style, and the colorful animal stamped will add energy and fun to the garden or rear patio. The elegant pool has reinforced walls made of tritech material, a material with 3 layers of reinforcement, which consists of rolled PVC and a polyester mesh. Thanks to the top quality steel structure and reinforced side walls, the removable pool is very stable and lasting. In addition, the pool structure is equipped with the Framelink system, which guarantees a safe connection of the tubes and avoids metal corrosion on metal. This pool can be mounted quickly and easily. Simply place the pool on a flat surface, install the entire structure and fill the pool with water. Thanks to the drain valve, the water can be emptied easy and quickly. The pool is easy to fold to save and transport it when it is not used.

  • Dimensions: 366 x 76 cm (High diameter)
  • Structure material: pp, steel
  • Wall material: PVC, polyester (tritech)
  • Capacity (90%): 6473 L (1710 gal)
  • Framelink system for an easy connection
  • With submarine adhesive repair patch
  • With integrated flow control drain valve
  • Vetonek article number: 56706
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.