Skip to product information
  • Vetonek Piscina con estructura Steel Pro 396x84 cm

Steel pro 396x84 cm structure pool

285,54 €
285,54 € 321,37 €
You save 11% (35,83 €)
Tax included. Shipping calculated at checkout.

Description

Have fun with your family and friends in the Steel Pro pool in Vetonek. The round shape provides more space to swim and play. The pool walls are built with Duraplus ™, a material reinforced with a polyester mesh nucleus and two layers of high caliber PVC to offer higher force and durability. The 3 -layer band provides additional support on the pool wall. The pool comes with Framelink System ™ pateting, and T connectors avoid metal corrosion on metal. The integrated drain valve to control the flow is connected to the garden hose (with adapter included) and, thanks to it, it is easy to download the water. This pool on ground is also equipped with accessories to be compatible with Flowclear ™ filter pumps. It also includes an adhesive patch of submersible reparation. Structure pool is easy to install in just 20 minutes and also easily disassembled to save it out of season.

  • Structure material: metal
  • Dimensions: 396 x 84 cm (high diameter)
  • Capacity (90%): 8680 L (2293 gal)
  • PVC side walls and high -resistance polyester of 3 layers
  • Building control drainage valve built -in
  • Underwater adhesive repair patch
  • Easy to install and disassemble
  • Filter pump capacity: 2006 L (530 gal)
  • Tension: 220-240 v
  • Vetonek article number: 5612E
  • Delivery includes:
  • 1 x pool
  • 1 x filter pump (#58383G)
  • 1 x type ⅱ cartridge (#58094)
This device is not designed to be used by people (including children) with reduced physical, sensory or mental abilities, or with lack of experience and knowledge, unless they have received supervision or instructions on the use of the apparatus by a responsible person of your safety. This product is not a toy. Do not allow children to play with the device. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.