Skip to product information
  • Step2 Caballete de doble cara para niños Jumbo Art multicolor

Step2 Caballete de doble cara para niños Jumbo Art multicolor

269,44 €
269,44 € 303,25 €
You save 11% (33,81 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Este caballete de doble cara multicolor para niños de Step2, modelo Jumbo Art, es una excelente superficie multiusos para que tus pequeños artistas jueguen! La tableta de dibujo de juguete de Step2 posee un diseño de doble cara, con una pizarra blanca y una pizarra de tiza para que se diviertan de forma creativa. También tiene clips de arte que permiten que las criaturas muestren su última obra de arte con orgullo. La tableta de dibujo para niños estimula el desarrollo de habilidades motoras finas a través del dibujo, la escritura y la pintura. Posee dos bandejas de almacenaje extraíbles debajo, ¡por lo que ordenar se hace en un periquete! Nota: Los materiales artísticos, como rotuladores, tizas y borradores, no están incluidos.

  • Color: Multicolor
  • Material: Plástico por moldeo rotacional
  • Dimensiones: 125,73 x 38,1 x 109,22 cm (largo x ancho x alto)
  • Diseño de doble cara
  • Superficie de borrado en seco por un lado y pizarra de tiza por el otro
  • Clip de papel a cada lado
  • Bandeja de almacenaje grande y extraíble
  • Construcción robusta
  • Fácil de montar
  • Edad recomendada: A partir de 3 años
  • ADVERTENCIA: No apto para niños menores de 36 meses.
  • ADVERTENCIA: Sólo para uso doméstico.
  • ADVERTENCIA: Debe ser usado bajo la supervisión directa de un adulto.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.