Skip to product information
  • Vetonek Tumbonas con mesita 2 unidades acero gris antracita

Sun loungers 2 units anthracite gray steel

352,08 €
352,08 € 396,26 €
You save 11% (44,18 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This game consists of 2 sun loungers and 1 folding table with an elegant mesh design and will give a touch of contemporary style to the interior or exterior space of your home. Your guests will be amazed with this modern industrial style loungers game. The sun loungers have a reclining support in 5 positions, so that it can be completely relaxed in a comfortable posture. The elegant sun lounger game is perfect to enjoy your free time in the pool, the patio, the garden or the living room. The sun lounge game is made of solid steel with electrophoretic and dust paint coating. The set of metal sun loungers is very strong, durable and resistant to weathering and oxide. Thanks to its finish, it is also very easy to clean and maintain. The mesh design gives you an elegant appearance. The table is perfect to leave food and drinks. It folds easily when not used. The delivery includes 2 sun lollipops and 1 folding table. The assembly is simple.

  • Color: Anthracite gray
  • Material: Electrophoretic paint coated steel and powder coating
  • Table dimensions: 38 x 38 x 38 cm (length x width x high)
  • Loom dimensions: 66 x (154-183) x (65-103) cm (wide x high x)
  • Seat width: 55 cm
  • Seat depth: 116 cm
  • Seat height from the floor: 34 cm
  • Height of the headquarters from the ground: 50 cm
  • Maximum load capacity (each lorage): 120 kg
  • Mesh design
  • Outlet resistant and oxidation
  • Reclinable adjustable backrest in 5 positions
  • Suitable for use both outdoors and indoor
  • Delivery includes 2 sun lumbers and 1 folding table
  • Easy assembly
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.