Skip to product information
  • Vetonek Taquilla de acero blanco 90x40x180 cm

Taquilla de acero blanco 90x40x180 cm

425,87 €
425,87 € 479,31 €
You save 11% (53,44 €)
Tax included. Shipping calculated at checkout.

Description

Este armario taquilla tiene un diseño moderno, por lo que será un gran aporte decorativo para cualquier estancia u oficina. Este armario de almacenaje está hecho de acero, por lo que es duradero y fácil de limpiar. Cada compartimento está equipado con una puerta con cerradura. El armario tiene amplio espacio de almacenaje para guardar con seguridad ropa y otras pertenencias personales. Además, el portaetiquetas identificativas y los orificios de ventilación te permiten clasificar perfectamente tus cosas. Esta taquilla es adecuada para colegios y oficinas, con el fin de guardar diversos artículos.

  • Color: Blanco
  • Material: Acero
  • Dimensiones: 90 x 40 x 180 cm (ancho x profundo x alto)
  • 15 puertas con cerradura (2 llaves incluidas para cada puerta)
  • Con orificios de ventilación y portaetiquetas sobre las puertas
  • Capacidad de carga por compartimento: 10 kg
  • Capacidad de carga total: 150 kg
  • Requiere montaje: Sí
  • ADVERTENCIA: Para evitar el vuelco, este producto debe usarse con el dispositivo provisto para fijarlo a la pared
  • Legal Documents:

    Puedes encontrar más detalles sobre cómo evitar que los muebles se vuelquen aquí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.