Skip to product information
  • Tiger Dispensador de jabón Boston plateado 308530946

Tiger Silver Boston Soap Dispenser 308530946

68,80 €
68,80 € 77,43 €
You save 11% (8,63 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Tiger Boston series soap dispenser combines a luxurious brushed stainless steel finish and will be a practical and decorative contribution to its bathroom or toilet. The removable plastic tank can be filled easy and quickly with liquid soap and the product can be easily mounted on the wall in any desired position. Because the product is linked to a wall plate, assembly materials are not visible. The soap dispenser is also suitable for assembly with the type 1 Tigerfix, with which accessories can easily be fixed to a smooth and hard surface with a patented glue system. Drilling is not necessary and accessories can be easily removed without leaving residues on the surface. The delivery includes a soap dispenser, a cylindrical soap container, a mounting plate, screws and caps. Keep in mind that Tigerfix 1 is sold separately, and can find this product in our web store (SKU: 406611).

  • Color: Silver
  • Material: stainless steel, brushing
  • Dimensions: 5 x 7.3 x 19.5 cm (width x depth x height)
  • Made of high quality material, convenient for use in wet areas
  • The plastic soap tank can easily withdraw from the support and fill
  • Easy to install and easy to clean
  • Invisible assembly system: There are no visible assembly elements after assembly
  • Includes stainless steel assembly accessories, screws and expansion plugs
  • Assembly without screws is also possible with the Tigerfix system, for which it is not necessary to drill
  • The delivery includes a soap dispenser, a cylindrical soap container, a mounting plate, screws and caps.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.