Skip to product information
  • Vetonek Tiras de luces solares LED 2 uds blanco frío interior/exterior

LED solar light strips 2 units white inner/outdoor

41,41 €
41,41 € 46,60 €
You save 11% (5,19 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The solar fairy light is perfect for use as a lighting complement in any decorative project. It is suitable for Christmas, parties, weddings and other parties. During the day, the efficient solar panel converts sunlight into electrical energy stored in the integrated battery. At night, the lights will turn on automatically. The light chain is equipped with 200 low consumption LEDs, which creates a magical lighting performance. It has 8 different lighting effects: combination mode, waves, sequential mode, slow shine mode, flickering, slow discoloration mode, turn and continuous lighting. This is a great decorative accessory to illuminate interior and exterior spaces. Note: The solar lights must be charged with direct sunlight before the first use. The product has a USB connector, but the 5 V certified USB supply source is not included.

  • Light color: cold white
  • Energy Source: Solar Energy
  • LED number (total): 400
  • LED number (each): 200
  • Solar Panel: 2 V 200 Ma
  • Battery: 1.2 V 800 Ma
  • Departure: 3 V 75 Ma
  • Includes 1 m cable
  • With 8 lighting modes
  • Low consumption LED
  • Dual USB connection
  • Suitable for interiors and exteriors
  • Delivery contains:
  • 2 x strips of solar lights
This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.