Skip to product information
  • Vetonek Toldo de carrete motorizado azul y blanco 500x300 cm

Toldo de carrete motorizado azul y blanco 500x300 cm

907,66 €
907,66 € 1.021,56 €
You save 11% (113,90 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Crea un lugar fresco para relajarte en el jardín y protegerte del sol con este increíble toldo de carrete retráctil! Es ideal para crear tu propio paraíso de sombra, al que puedes invitar a tus amigos y familiares, especialmente en la cálida primavera y en los calurosos días de verano. Este toldo carrete retráctil consta de un marco de aluminio y tela de poliéster de calidad con un revestimiento de PU. El marco de aluminio reforzado y el tejido de poliéster resistente a los rayos UVA y a la intemperie hacen que el toldo sea fuerte y duradero. El toldo carrete también repele la suciedad y el agua. El toldo está motorizado y se puede montar fácilmente en la pared con los soportes de pared incluidos. ¡Disfruta de una bebida fresca, un sabroso manjar o una buena conversación en tu patio con amigos mientras te recuestas debajo de este increíble toldo retráctil de carrete!

  • Color: Azul y blanco
  • Material: Aluminio con recubrimiento de polvo, tejido con revestimiento de PU
  • Tela: 100% poliéster
  • Ancho: 500 cm
  • Proyección máxima: 300 cm
  • Con soportes de pared estándar
  • Motorizado para fácil apertura y cierre
  • Tensión de alimentación: 230V~ , 0,95A; 50/60Hz
  • Potencia: 226 W
  • Par: 40 nm
  • Velocidad: RPM 13
  • Requiere montaje: Sí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.