Skip to product information
  • Vetonek Toldo lateral de balcón rojo 145x250 cm

Toldo lateral de balcón rojo 145x250 cm

72,53 €
72,53 € 81,63 €
You save 11% (9,10 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este toldo lateral sencillo pero elegante proporciona intimidad y crea un lugar acogedor. También ayuda a protegerse del viento y del sol bajo. La pantalla está hecha de poliéster resistente a los rayos UV y a las rasgaduras. El carrete de aluminio asegura un rodamiento suave. Cuenta con función de autobloqueo para que pueda detenerse en cualquier lugar. La longitud es ajustable hasta 250 cm. El toldo puede retraerse automáticamente en el carrete de acero con tan solo tirar de las anillas triangulares inferiores. Además, este toldo vertical de balcón se puede fijar tanto en la pared como en el techo según lo que necesites. La entrega también incluye los accesorios de montaje.

  • Color: Rojo
  • Material: Acero, aluminio, tela (100% poliéster)
  • Dimensiones totales: 145 x 250 cm (ancho x largo)
  • Ancho de pantalla: 130 cm
  • Diámetro del rodillo de aluminio: 35 mm
  • Peso de la tela: 180 g/m²
  • Resistente a los rayos UV y al agua
  • Casete ancho
  • Montaje de 2 vías: pared y techo
  • Retroceso automático mediante anillos triangulares inferiores
  • Incluye accesorios de montaje
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.