Skip to product information
  • Vetonek Tumbonas de jardín y mesita 3 piezas ratán sintético negro

Tumbonas de jardín y mesita 3 piezas ratán sintético negro

486,59 €
486,59 € 547,65 €
You save 11% (61,06 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Crea el salón atractivo y relajante con el que siempre has soñado con este elegante juego de tumbona y mesa de centro. ¡Puedes disfrutar de una tarde relajante y soleada con tu amigo en la tumbona! Hecho de ratán PE resistente a la intemperie, el diván es fácil de limpiar, resistente y apto para el uso diario. Cuenta con una estructura de acero robusta con recubrimiento en polvo, lo que hace que la tumbona sea perfectamente estable y duradera. Ambos lados de la tumbona se pueden levantar y ajustar en diferentes configuraciones para las posiciones más cómodas para sentarse o acostarse. El cojín acolchado densamente proporciona la máxima comodidad y soporte adicional. La funda de cojín es extraíble para facilitar el lavado. Puedes tener incluso bebidas, tu teléfono, libros u otros artículos pequeños al alcance en la mesa auxiliar incluida. Nota: Recomendamos cubrir la tumbona y la mesa bajo la lluvia, la nieve y las heladas.

  • Color: Negro
  • Color del cojín: Negro
  • Material: Ratán PE, acero con recubrimiento en polvo, tela (100% poliéster)
  • Dimensiones de la tumbona: 195 x 60 x 31 cm (largo x ancho x alto)
  • Dimensiones de la mesa de centro: 40 x 40 x 40 cm (largo x ancho x alto)
  • Ambos lados de las tumbonas son ajustables
  • Resistente a la intemperie
  • Fácil de mantener
  • Requiere montaje: Sí
  • La entrega incluye:
  • 2 x Tumbonas
  • 2 x Cojines de asiento
  • 1 x Mesa de centro

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.