Skip to product information
  • Vetonek Tutor para tomates con bolsa 2 uds de acero y PP 116 cm

Tutor for tomatoes with bag 2 Uds of steel and pp 116 cm

25,54 €
25,54 € 28,74 €
You save 11% (3,20 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This tutor for tomatoes is durable and adjustable, and offers optimal support for your tomatoes and other plants with stems and vines. Durable and stable: The tutor for tomatoes is made of steel with PE coating, so it is durable, corrosion resistant and long -term. DIY DESIGN: This tutor for tomatoes is so versatile that you can create several forms, not Only triangles. Adjust your height as your plants grow to give them the best support. Vertical growth helps that fruits and leaves do not weigh on the stems. Practical design: the tomato tutor has pressure arms that are subject effortlessly to the tutors, while their lower part has a tip design for Facilitate the insertion in the soil. Amlies uses: The tutor for tomatoes is versatile and adequate for a wide variety of plants with stems and vines, such as tomatoes, cucumbers, beans and other vines crops. In addition, it provides excellent support for flowers such as roses and orchids. Either in gardens, greenhouses or agricultural land, tomato tutors are very used.

  • Color: Green
  • Plant bag color: black
  • Tube material: PE steel
  • Stake connector material: PP (polypropylene)
  • Total dimensions: 32 x 29 x 116 cm (length x width x high)
  • Tube dimensions: 11 x 400 mm (high diameter x)
  • Plant bag dimensions: 35 x 34.5 cm (high diameter x)
  • Number of tutors for tomatoes: 2
  • Requires assembly: Yes
  • Delivery contains:
  • 18 x vertical bars
  • 18 x Transversal bars
  • 2 x bags of plants

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.