Skip to product information
  • Ubbink Cascada Nevada 30 cm de acero inoxidable

Ubbink Cascada Nevada 30 cm de acero inoxidable

176,37 €
176,37 € 198,50 €
You save 11% (22,13 €)
Tax included. Shipping calculated at checkout.

Description

Esta cascada de hoja de acero inoxidable modelo Nevada, con su diseño moderno y exclusivo, será sin duda un foco de atención. Este set de cascada se puede montar fácilmente en una pared. Hecho de acero inoxidable 304, esta cascada de jardín es muy duradera, para años de uso. Consiga esta cascada de jardín de Ubbink y cree un relajante elemento decorativo con agua en su propio patio. Para crear una hermosa cascada, es importante que elija una bomba con la capacidad adecuada. Para la Nevada 30 de Ubbink dependiendo de la diferencia de altura entre el agua y la cascada, necesita una bomba con la siguiente capacidad:Diferencia de altura 50 - 100 cm: Capacidad de bomba recomendada 2000 - 2500 l/hDiferencia de altura 150 cm: Capacidad de bomba recomendada 7000 - 9000 l/hDiferencia de altura 200 cm: Capacidad de bomba recomendada 9000 - 11000 l/hDiferencia de altura 250 cm: Capacidad de bomba recomendada 13000 - 15000 l/h

  • Material: Acero inoxidable
  • Dimensiones totales: 13 x 30 x 33 cm
  • Con 1 rosca hembra y conexión de manguera de 25 mm
  • La cascada no está diseñada para funcionar en agua que contenga cloro y sal
  • Material de montaje incluido
  • Bomba recomendada:
  • Para cascadas de 30 cm de altura: SKU 401405 Ubbink Bomba de fuente "Xtra 2300"
  • Para cascadas de 40-50 cm de altura: SKU 401406 Bomba de fuente Ubbink "Xtra 3900" / SKU 401402 Bomba de fuente para estanque Ubbink "Elimax 4000"

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.