Skip to product information
  • Ubbink Conjunto SolarMax 600 con panel solar y bomba 1351181

Ubbink Conjunto SolarMax 600 con panel solar y bomba 1351181

139,63 €
139,63 € 157,15 €
You save 11% (17,52 €)
Tax included. Shipping calculated at checkout.

Description

Las bombas de jardín no siempre están cerca de un enchufe, pero el conjunto SolarMax 600 de Ubbink que se puede usar independientemente de la red eléctrica. ¡SolarMax es una bomba de fuente fácil de instalar y mantener, ideal para propietarios de estanques con conciencia ambiental! Este dispositivo utiliza la energía solar para hacer funcionar un bonito adorno de agua en el jardín. Dependiendo de la insolación solar y del modelo, la velocidad de circulación de la bomba puede alcanzar 610 L/h. Los paneles solares son resistentes a la intemperie y, por lo tanto, son muy duraderos. La entrega incluye módulo solar con estaca de tierra, bomba solar con cable de conexión de 5 m, 4 tubos de subida y 2 chorros de agua.

  • Dimensiones del panel solar: 40 x 25,5 x 2,5 cm (atura x anchura x grosor)
  • Módulo solar
  • Potencia: 10 W
  • Voltaje nominal: 18 V
  • Corriente nominal: 579 mA
  • Protección de entrada: IP65
  • Rango de temperatura: -30 °C a +75 °C
  • Bomba
  • Voltaje de funcionamiento: 18 V
  • Corriente de funcionamiento: 335 mA - 6 W
  • Rendimiento máximo: 610 L/h
  • Cabezal de entrega máximo: 1,7 m
  • Protección de entrada: IP68
  • Rango de temperatura: +5 °C a +40 °C
  • Longitud del cable: 5 m
  • Sin almacenamiento de la batería
  • Incluido en la entrega:
  • Módulo solar con estaca de tierra
  • Bomba solar con cable de conexión de 5 m
  • 4 tubos de subida y 2 chorros de agua.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.