Skip to product information
  • Vetonek Valla de jardín con puntas acero negro (0,75-1)x1,7 m

Valla de jardín con puntas acero negro (0,75-1)x1,7 m

68,16 €
68,16 € 68,16 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Cree una barrera segura alrededor de su propiedad con nuestra cerca de jardín premium! Esta valla de jardín de acero de alta calidad, que consta de 1 panel de valla y 2 postes, tiene una longitud total de 1,7 metros. Formará una robusta barrera perimetral, segura y sin necesidad de mantenimiento para su jardín, hogar o propiedad comercial. Fabricada en acero resistente, la valla es extremadamente estable, robusta y duradera. Además, con barras verticales rematadas con puntas de lanza y un fuerte refuerzo horizontal que fortalecerá la estructura, nuestra cerca de jardín proporcionará un alto grado de privacidad y seguridad. El panel de la cerca es fácil de montar.

  • Color: Negro
  • Material: Acero
  • Longitud total: 1,7 m
  • Altura: 75-100 cm
  • Con puntas de lanza
  • 2 formas de montaje: Normal e invertido
  • Accesorios de montaje incluidos
  • La entrega incluye 1 x panel de valla y 2 x postes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.