Professional Vetonek Adhesive Cement

13,75 €
13,75 €
Tax included. Shipping calculated at checkout.
Color

Description

If you don't want to make a mistake, this glue cement is perfect, it works for any flooring or covering, ceramic or stone, especially if you don't have much experience, it is perfect for its ease of preparation and handling.

To glue any type of piece, ceramic, glass mosaic, slate, stoneware, porcelain stoneware, porous coatings, baked clay, natural and artificial stone, tile on tile.

Great flexibility, with increased open time and zero vertical slip.

 

Characteristics

  • White cement glue.
  • Yield of 1.3 kg per mm and m², that is, for a thickness of 4 mm with 1 25 kg bag you can place 5 m².
  • Type C2TES1.

 

Instructions for use

To prepare it, mix each 25 kg bag with 6.75 liters of water, beat it well with an electric mixer, let it rest for 5 minutes and knead again before applying.

 

Suitable supports for this glue cement

  • Plates
  • Cement screeds and renders
  • Cured concrete slabs
  • Vibrated or bush-hammered concrete
  • Cellular concrete
  • Brick or natural stone walls
  • Radiant panels and floors
  • Existing floors in glazed ceramic, porcelain stoneware, terrazzo and natural stone
  • Supports located in industrial premises or subject to intense traffic (shopping centers)
  • Cork panels, expanded polyurethane and plasterboard (dust-free) as long as they are solidly fixed.

 

For both interior and exterior flooring and wall coverings.

Suitable for facades and pools.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.