Skip to product information
  • Vetonek Pegamento híbrido GA-WA25 2 unidades
  • VicArt Pegamento híbrido GA-WA25 2 unidades vidaXL

VICART Hybrid glue Ga-WA25 2 units

31,07 €
31,07 € 34,97 €
You save 11% (3,90 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The GA-WA25 model hybrid adhesive of the Vetonek brand is a high quality professional glue that is perfect to paste and seal 3D wall panels. This Vetonek fast drying adhesive is durable and elastic, and makes joining 3D wall panels easier than ever. A tube is enough for 18 panels. Delivery includes 2 hybrid adhesives.

  • Tube dimensions: 5 x 20 cm (diameter x height)
  • 1 x tube is enough for 18 3D wall panels
  • Polymeric adhesive that adheres to most non -porous surfaces
  • It can be painted with water -based paintings
  • Durable and elastic
  • High tensile strength
  • Fast drying
  • Delivery includes 2 hybrid adhesives

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.