Vidaxl sand bags 25 units dark green 103x25 cm

44,42 €
44,42 € 49,99 €
You save 11% (5,57 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These practical sandbags are perfect for using them as barriers against torrential rains, water and floods. Durable material: The sandbag is made with strong HDPE, which is resistant to water, tear and abrasion. Stuffed with sand, the flood barrier is still resistant and can be folded, so it is ideal to waterproof and provide a safe area. Fácil to fill and manipulate: wherever you need to use the bags, the defense against floods is filled with sand or quickly and easily. The water barrier comes with a transport handle and two integrated transport straps for comfortable handling and precise placement. Design with cordon: the flood protection barrier comes with a cordon in the opening, which allows you to tighten it and Easily set it to avoid sand leaks, so it is comfortable and fast to use. Many uses: these reusable sand sacks effectively protect the house, garage, basement entrances and other hurricane areas, floods and unwanted entrances by doors and windows. They also stabilize sacks, silos or other structures. SAVE FACILLY: The barrier against home floods can be folded up to a small size when not used and requires little storage space.

  • Color: dark green
  • Material: HDPE (high density polyethylene) with treated protection against UV rays
  • Dimensions: 103 x 25 cm (length x wide)
  • Max. loading (each): 15 kg
  • With a transport handle and 2 integrated transport straps
  • Delivery contains:
  • 25 x sand bags

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.