Skip to product information
  • Mosquitera Blanca Con 2 Puertas Neto Mongolia 200 x 150 x 145cm

White mosquitora with 2 net net doors 200 x 150 x 145cm

42,30 €
42,30 € 47,61 €
You save 11% (5,31 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This mosquito net is suitable for the use of interior and exterior. It is perfect for keeping all flying and annoying insects away and offers a comfortable space for sleeping. This mosquito net, made of 100 % polyester, has a Mongolian yurt form with two openings. The fine mesh (225 mesh / square inches and the recommendation of WHO) of this round mosquitora guarantees both the perfect circulation of air and precautions against insect bites. Built of quality fiberglass, the supports are stable and durable. Equipped with 2 zippers on both sides, the mosquito net is easily accessible. With this white mosquito. creating a romantic and elegant atmosphere to the bedroom or the camp area. What is more, you can decompress the mosquito net at any time you want, since it is easy to install and very light. This mosquito net is an ideal option to be used both at home and abroad on hot summer days!

  • Color: White
  • Size: 200 x 150 x 145 cm (length x width x height)
  • Post material: fiberglass
  • With 2 openings
  • Net: 225 mesh / square inches
  • Suitable for double bed due to its maximum width of 150 cm (large size)
  • The posts are flexible, so the bed size is also flexible
  • Equipped with 2 zippers on both sides to facilitate access
  • Material: Polyester: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.