Skip to product information
  • Vetonek Panel de valla WPC gris 1391x186 cm

WPC Valla Panel Gray 1391x186 cm

3.063,62 €
3.063,62 € 3.448,04 €
You save 11% (384,42 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This fence panel can be used as a garden or residential fence barrier for greater privacy and safety. Durable material: the garden fence is made of WPC (composed of wood and plastic), so it is durable, weather resistant and it is not easy to rot or oxide. It can be used for a long time. Robust structure: Thanks to the upper and lower aluminum profile, the fence tables can firmly join together, which increases its robustness and resistance to the impacts. Stable design: thanks to the lower panel design From the aluminum post, the fence can be firmly fixed to the ground, which improves its resistance to the impacts. Facil of installing: the privacy fence is mounted very easily inserting the lames. In addition, it has the flexibility of mounting both vertically and horizontally according to your needs.

  • Gray
  • Material: WPC (compound of wood and plastic), aluminum
  • Total dimensions: 1391 x 186 cm (high x width)
  • Dimensions of the fence board (21 cm): 21 x 2 x 170 cm (length x width x high)
  • Dimensions of the fence table (11 cm): 11 x 2 x 170 cm (length x width x high)
  • Dimensions of the upper final bar: 8.7 x 2.5 x 170 cm (length x width x high)
  • Dimensions of the lower final bar: 4.9 x 2.5 x 170 cm (length x width x high)
  • Post dimensions: 7 x 7 x 185 cm (length x width x high)
  • Requires assembly: Yes
  • Delivery contains:
  • 64 x Valla boards (21 cm)
  • 8 x fence boards (11 cm)
  • 9 x Base Aluminum Posts
  • 8 x upper final bars
  • 8 x lower final bars

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.