Skip to product information
  • Vetonek Zapatero SENJA aspecto ratán madera maciza negro 59,5x35x107cm

Zapatero Senja Black Wood Black Wood 59.5x35x107cm

164,75 €
164,75 € 185,43 €
You save 11% (20,68 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Keep your shoes away from dust and disorder to create an orderly environment in your home with this wooden shoemaker! Solid pine wood: solid pine wood is a beautiful natural material. Pine wood has straight veins, and knots give the material its distinctive rustic appearance. UV barniz: UV varnish is a special type of varnish that ends with an ultraviolet drying machine. Create a more vivid, more luxurious and tactile finish compared to varnishes that are not UV. Objects.Superficie with the appearance of Ratán: The surface of the Zapatero door is handmade with synthetic ratt Stay Stable Stable Surface: The upper part of this shoemaker furniture serves to place your favorite ornaments such as vases, pots, etc. WARNING: To prevent it from turning, this product should be used with the setting device to the wall included.

  • Color: black
  • Material: solid pine wood with UV varnish finish, engineering wood, synthetic ratan
  • Dimensions: 59.5 x 35 x 107 cm (wide x high x high)
  • Door dimensions (each): 27 x 73 cm (high x width)
  • With wooden handles
  • Gama: Senja
  • Requires assembly: Yes
  • Legal Documents:

    You can find more details on how to prevent furniture from turning here

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.