Skip to product information
  • Máquina de musculación con banco y saco de boxeo

Banking machine and boxing bag

372,08 €
372,08 € 418,77 €
You save 11% (46,69 €)
Tax included. Shipping calculated at checkout.

Description

This multifunctional machine with a bank and a boxing bag is suitable for intensive exercises such as boxing, or exercises to stay in shape such as pull-ups, flexions, abdominals, which will tone the chest, back, biceps, triceps and abdominals, To increase the strength from its upper part and increase muscle mass. To offer you a more comfortable experience, the multifunctional machine has a black coated black finish and a polyurethane layer, with padded cushions in the bank and the supports. The multifunctional machine has a maximum load of 100 kg, and the base and the frame are very stable.

  • Dimensions: 182 x 125 x 218 cm (length x width x high)
  • Color: black
  • Materials: Base of dusty approaches and artificial leather cushions
  • Boxing Saco Dimensions: 33 x 110 cm (Diameter X Height)
  • Maximum load: 100 kg
  • Characteristics:
  • A bank
  • A boxing bag
  • Upper bar
  • Robust base
  • Note that the delivery does not include the sand for the boxing sack
  • Material: polyurethane: 100%
Read the manual carefully before using the product. The product is a home fitness device. If it is under treatment due to heart problems, blood pressure, high cholesterol, etc., it is very important to consult a doctor before training. Always pay attention to your health status before training. Incorrect training methods can cause health problems. Stop training if you have any discomfort, such as headache, chest oppression, irregular heart rate, difficulty breathing, dizziness and nausea, etc.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.