Skip to product information
  • Set De Herramientas De Sincronización Del Motor Por Decreto

Motor synchronization tools set by decree

131,54 €
131,54 € 148,04 €
You save 11% (16,50 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This complete set of tools is to adjust, block and remove the camshaft, the flywheel, the axis of the injection and crankshaft pump, etc. Tools that will be used for the following vehicles or engines: Alfa Romeoalfa Romeo 145, 147, 155 and 156, 1.4 and 1.6 Twin Spark gasoline, starting in 1996alfa Romeo 145, 146, 155, 156, Spider and GTV 1.8 TWIN SPARK OF 1996 MOTOR CODES 322.01, 335.03, 671.06, 676.01, 372.03 and 321.04 ALFA ROMEO 145, 146, 147, 155, 156, SPIDER and GTV 2.0 TWIN SPARK, OF THE YEAR 1995 MOTOR CODES 323.01, 672.04 FA Romeo 2.5i 155, of the year 1992-1997 Motor Codes 673.01alfa Romeo 155 2.5 V6 Since 1997 Motor Codes 324.01 Gasoline Motors of Fiatfiat Point, Brava, Bravo and Stil .000FIAT BRAVA BRAVO 1.4 12V, from 1995 to 1998 Motor Codes 182 A3,000, 182 A5.000FIAT BRAVA BRAVO 1.6 16V, 1995 or FIAT STILO 1.6 16V from 2001 Motor codes 182 A4.000, 182 A6,000, 182 B6.000FIAT BRAVA BRAVO 1.8 16V, 1995 or Motor Codes 182 A2,000 Fiat Marea, Marea Weekend, Multipla 1.6 16V and, from 1996 Motor Codes 182 A4,000, 182 A6,000, 182 B6.00FIAT Type Type and Coupe 2.0 16V and 2.0 16V Turbo, from 1993 to 2001 Motor Codes 836 A3,000 and 175 A1.000 FII RFVFIAT ULYSSE 1.8, 2.0 and 2.0 TURBO, starting in 1994fiat Ducato 2.0, from 1994 Motor LFW, RFU, RFW and RGXFIAT Bravo, Marea, Marea Weekend 2.0 20v Coupé and, from 1994 to 2001Codigos of 182 A1,000 and 175 A3,000 Diesels Fiatfiat Bravo, Marea, Multipla and 1.9d Weekend Marea, TD and JTD of 1996 Motor Codes 182 A7,000 (TD 100), 182 A8.000 (TD 75), 182 B4.000, 185 A6,000, 188 A3,000, 192 A1,000 and 192 A3.000FIAT Point 1.7D, TD and CAT & EGR, from 1996 to 1997 Motor Codes 176 B3.000, 176 A3,000 , 176 A5.000FIAT TYPE, EARLY AND DUCATO 1.9D AND TD, OF THE YEAR 1987-1998 ENGINE CODES 149 B1.000, 160 A6,000, 160 A7,000, 160 D1,000, 154 B.000, 230 A2. 000 and 230 A4.000 Fiat Ulysse, Scudo and Ducato 1.9D and TD, compared to the year 1994 Motor D8B, D9B, DHX and DJYFIAT ULYSSE 2.1TD 12V, since 1996FIAT Marea and Marea Weekend 2.4JTD, starting in 1996codigos de Motor 182 A7,000 (TD 100), 182 A8,000 (TD 75), 182 B4.000, 185 A6,000, 188 A3,000, 192 A1.000 and 192 A3,000 PLAYERS OF GASOLINE LAIQUENCIA YPSILLON 1.4 12V, From 1996 to 1999 Motor Codes 182 A3,000, 182 A5,000 It is presented in a boxed box to facilitate deposit and transport.

  • Closing pin: 65 mm
  • M: 8 x 45 mm screw
  • M: 7 x 18.8 mm screw
  • M: 6 x 45 mm screw
  • Day. Closing pin: 5.8 x 59 mm

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.