Vetonek professional tail cement
Description
The ideal tail cement for your projects!
If you are looking for a High quality tail cement, this product is perfect for you. Designed for any pavement or coating, whether it's ceramics either stone, its ease of preparation and management makes it the ideal option, especially if you do not have much experience.
Cement features tail:
- Color: white
- Performance: 1.3 kg per mm and m². With a 4 mm thickness, a 25 kg bag allows you to cover up to 5 m².
- Guy: C2TES1
- Excellent flexibility and zero vertical sliding.
- Open time increased.
Mode of employment: For optimal preparation, mix each 25 kg bag with 6.75 liters of water. Báte it well, preferably with electric blender. Let stand during 5 minutes and knead before applying.
Recommended supports:
- Soleras plates and cement revocation.
- Set concrete suns.
- Vibrated or abujardado cement.
- Cell cement
- Brick walls or natural stone.
- Radiant plates and soils.
- Existing pavements in enameled ceramics, porcelain, terrazo and natural stone.
- Supports in industrial or intense traffic (for example, shopping centers).
- Cork panels, expanded polyurethane and cardboard-yeso (dust free), provided they are solidly fixed.
Applications: Suitable for pavements and coatings both interior and exterior. Ideal for Facades and Pools.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.