Rounded board
Description
Decorative stone for gardens
The decorative stone It is the ideal option to beautify areas of trees and plants, since not only Keep moisture, but also Protect the ground. With a friendly appearance and touch thanks to its rounding, this gray/black stone fits perfectly into Modern gardens and more classic projects.
One of its most prominent characteristics is that, due to its wet rounding, the board Does not lose the color tone. Also, being a stone No porous, it will not generate Verdines or dirt, unlike other more porous stones. It is a 2021 novelty arising thanks to the request of our clients.
We are sure that this product Original and novel You will surprise your friends and family. This stone is made from Recycled material from slate debris, which is subsequently crushed and classified. Next, it is artificially rounded; The rounding process is done in wet so as not to lose the color tone and make sure that the rounding is finer.
Available in various sizes: 6-12 mm, 12-40 mm and 40-110 mm, in Big Bag of 1,000 kg and in 20 kg bags, this stone is especially valued by its gray/black color without veins or oxide, which causes a high contrast with white and clear gravels. It is perfect for modern buildings with White facades, contributing to protect the soil health of your garden and, therefore, of your plants and trees.
In addition, its kind touch prevents dirt from penetrating it, keeping it new every time it rains.
Details to be taken into account: Due to its lajosta and flat shape, it is normal for this product to present small cascades hit once washed and classified. However, once placed in the garden and with a water hose, the shell will disappear forever.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.