Medinaceli Slab - large 50 × 50 cm format with fewer joints, smooth finish
Medinaceli Slab: a large format for a visually quiet outdoor space
Paving a patio with small pieces multiplies the joints and installation hours, and leaves a busy-looking finish that ages badly. This slab solves it with a 50 × 50 cm format and a smooth, wet-cast finish, covering more surface with fewer joints for a minimalist result.
✅ Key advantages
Large format: 50 × 50 × 3 cm, fewer joints and less installation time per square meter.
Smooth, wet-cast finish: a fine, even texture, free of pores or irregularities.
Contemporary look: a minimalist appearance that doesn't compete with furniture or planting.
Two colors: white and pirineos, the same as the step in the collection.
🏗️ Recommended applications
Patios and terraces at home.
Seating areas around pools.
Urban terraces and roof decks.
Wide garden paths.
📋 Technical specifications
Dimensions: 50 × 50 × 3 cm.
Finish: smooth, made by wet-cast molding.
Colors: white and pirineos.
Pieces per m²: 4.
Uses: patios, terraces and pool surrounds.
🧰 Installation
Compact the ground and spread a 10-15 cm sub-base of crushed gravel.
Spread a 4 cm mortar bed and screed it carefully.
Lay the pieces from the outside in, keeping the 1.5% slope.
Leave a fine 3 mm joint, in keeping with the minimalist look.
Bed with a rubber mallet without striking the edges.
Grout with joint mortar and clean the smooth surface right away.
📦 Available formats
50 × 50 × 3 cm in white.
50 × 50 × 3 cm in pirineos.
Sold by unit or by full pallet.
💡 Professional tip: with a smooth 3 cm slab measuring 50 cm a side, a sand bed isn't good enough: you need a mortar bed. On sand, any unsupported point leaves the piece sitting unevenly and it cracks down the middle the first time someone drags a chair across it. And clean the grout while it's still fresh: on a smooth surface, dried mortar leaves a haze that's very hard to remove.
