Segre Wall Coping End Piece - Drip Edge on 3 Sides Prevents Leaks

Segre Wall Coping End Piece: closing off the double-slope coping

The running coping protects the wall's two long sides, but leaves the end face exposed, and that's exactly where wind-driven rain gets in and causes damp and cracks. The Segre Wall Coping End Piece has a drip edge on three of its four sides, so the end of the wall and the top of the pillar are fully sealed.

✅ Key advantages

Drip edge on three sides: prevents leaks through the end face, the most exposed part of the coping.
Made to match: fits the coping model you're installing.
8 sizes and 3 colours: an end piece for every width in the range, with no cutting.
6.5 kg per unit: light to handle, even up on the wall.
Double-slope profile: the slope continues the course's without a step.

🏗️ Recommended applications

Closing the free end of enclosure walls.
Capping fence and entrance pillars.
Starting and finishing terrace parapets.
Capping exposed retaining walls.

📋 Technical data sheet

Material: high-quality concrete.
Profile: end coping with drip edge on three sides.
Sizes: 50 × 16 · 50 × 20 · 50 × 25 · 50 × 27.5 · 50 × 30 · 50 × 35.5 · 50 × 40 · 50 × 50 cm.
Weight: 6.5 kg per unit.
Colours: Grey, White and Beige.
Consumption: one piece per free wall end and one per pillar.

🧰 Installation

Lay the running coping first and leave the end gap free.
Dry-check that the end piece's slope continues the course's without a step.
Spread flexible bonding mortar over the bearing surface.
Orient the blank face towards the inside of the wall and the drip-edged end facing out.
Leave a 3-5 mm joint with the adjoining piece and point it with elastic mortar.
Clean while fresh and protect from rain for 24 hours.

📦 Available formats

Single unit, in the 8 sizes and 3 colours.

💡 Professional tip: count the end pieces before ordering, not after. A wall with two free ends and three pillars needs five end pieces, and on site people almost always order one. Since they're supplied as single units rather than by the pallet, forgetting one means leaving the wall open until the next delivery.

Segre Wall Coping End Piece - Drip Edge on 3 Sides Prevents Leaks

Segre Wall Coping End Piece - Drip Edge on 3 Sides Prevents Leaks

Segre Wall Coping End Piece: closing off the double-slope coping

✅ Key advantages

🏗️ Recommended applications

📋 Technical data sheet

🧰 Installation

📦 Available formats

Customer Reviews

Reviews in Other Languages

General conditions

Contact

Menu

Cart

Let customers speak for us