Vetonek chemical abujujardado: Agge concrete pavement oil seen
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Vetonek chemical abujujardado: Agge concrete pavement oil seen
He Vetonek chemical abujardado It is the ideal solution to create concrete pavements of arid seen in a simple and professional way. This low viscosity oil, formulated with lubricating and non -stick additives, allows you to achieve an aesthetic and durable finish without the effort and time required by the traditional method.
What makes it so special? The application is incredibly easy: You just need a spray to spray a fine layer on fresh concrete. Once the concrete has set, simply remove the surface layer with pressure water or a brush to reveal the aggregate and get a perfect finish.
Main advantages
Time and labor savings: Simplifies the process of creating arid pavements seen, reducing manual work.
Easy and fast application: Its low viscosity allows a uniform distribution without effort.
It does not leave waste: The formula is completely eliminated, guaranteeing a clean finish.
It does not affect concrete resistance: It keeps intact the mechanical properties of the material, ensuring its durability.
Mode of employment
To use the Chemical abujardado, follow these simple steps:
Once the fresh concrete is level and raided, apply the product evenly with a spray. Avoid the formation of puddles or supersaturation.
Let the concrete set it completely.
Eliminates the superficial layer with a stream of water under pressure or a brush to reveal the arid finish seen.
Technical data
Aspect: Yellow liquid.
Smell: Characteristic.
Density: 0.9 g/cm³.
Solubility: Dispersable in water.
Presentation
Available in 5 and 25 liter carafes.
Security considerations
Irritating product The use of glasses, gloves and protective clothing During its manipulation to avoid any direct contact.
Storage
Keep the product in your original, well -closed containers, in a dry place and away from heat sources or flames. The optimal storage temperature is +5 ºC to +30 ºC.