Projected arid monolayed mortar for facades
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Projected arid monolayed mortar for facades
Give your facade a stylized, natural and resistant finish with our premium selection of gravels for projected arid monolayed mortar. Our gravels are thoroughly selected of quality natural stones, including marble, Ofita and other minerals, offering an exceptionally aesthetic appearance and incomparable durability.
Selected gravels for facades
Each gravel has been carefully selected by size, guaranteeing the perfect granulometry for the projected on facades. The result is a uniform and harmonious finish that isolates the housing of moisture and provides a visually attractive appearance.
The projected arid mono forpa is an economic and high performance solution for any facade. Its application creates a water -resistant barrier that prevents moisture entry, helping to keep your home dry and comfortable in all stations.
In addition to its functionality, this selection of gravels gives a decorative and natural touch to any building. Their facades will show an attractive design and at the same time offer the protection they need to resist the inclement weather.
Aggregate packaging for monolayed mortar
Available in Big Bag of 1,000 kg. And 20 kg., Our selection of gravels for projected arid mono forpa is perfect for projects of all sizes. It doesn't matter if you are renewing a single facade or working on a large -scale construction, this product is the perfect solution to give it a resistant, stylized and natural finish to any building.
Discover the power of natural stones and the advantage of our premium team! Buy today our selection of gravels for projected arid monolayed mortar and give your facade the finish it deserves.
Projected aggregates
In addition, we are pleased to offer the container shipping service to the ideal port of each of our customers. For more information, please contact us.