BATHME LENNOX TAP Bathroom Cabinet without Sink with Ostippo Ebony Oak Countertop
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
BATHME LENNOX TAP Bathroom Cabinet without Sink with Ostippo Ebony Oak Countertop
Bathroom furniture without sink LENNOX with countertop or lid manufactured by Bathme in Spain. With the industrial bathroom furniture series LENNOX You can configure the furniture without a sink, without a lid or even with a lid of a different color. The colored handle handles matte black They contrast with the ostippo oak wood tones of the furniture.
Available only furniture, design your custom bathroom with the countertop in the color you like the most, or choose another sink.
LENNOX bathroom furniture without sink composed of:
-
bathroom furniture suspended from 2 drawers with guides cushioned closure Hettich with beige textile interiors. Matte black finish handle handle. Front and sides made of 16 mm laminated particle board (class E-1) with PVC edges.
- Measures: 60-70-80-100 x 54 x 45 cm (width x height x depth).
- Available finish: ostippo oak.
- Ebony finish countertop(check the possibility of choosing other countertop finishes). The countertop is supplied without holes for a tap or sink. These holes can be easily made depending on the type of installation.
- Measurements: 61-71-81-101 x 46 x 1.6 cm (width x height x depth).
More information:
- You can order the furniture without cover, simply contact us by phone, email or Whatsapp.
- All furniture Bathme They are delivered assembled and prepared for installation.
- Does not include sink, LED, taps, drain valve or siphon.
- The order is delivered to the building and sent on a highly protected pallet for transport. Review within the first 48 hours of receipt.