Hoodie with a hood for children Elamorduele
How much stone do I need?
How much stone do I need for the ground?
For pebble and gravel:
• approximately 80kg per m², based on a 5cm layer.*For particle sizes >32mm, a thicker layer is required.
• Consumption per sack: 1000kg = 0.625m³.
• Coverage: approximately 12.5m² with a 5 cm layer.
For pine bark:
• approximately 70L per m², based on a 5cm layer.
• Consumption per sack: 1000L = approximately 1m³ = approximately 600kg
• Coverage: approximately 14m² with a 5 cm layer.
For volcanic, slate and chamotte:
• approximately 50kg per m², based on a 5cm layer.
• Consumption per sack: 1000kg = approximately 1m³
• Coverage: approximately 20m² with a 5 cm layer
How much stone do I need to fill a gabion?
Density of approximately 1,650kg per 1m³.
The calculation is very easy to understand with an example: if you have a gabion of 100x50x30 cm, you must do the following calculations:
1x0.5x0.3 = 0.15m³
0.15x1,650 = 247.50kg of stone.
*It is always a good idea to calculate an extra 5%, since when gabions are filled they expand a little and a little more stone always fits than in the theoretical calculations.
Clarifications
ATTENTION!
The grain sizes of GRAVELS AND pebbles are sieve sizes
The actual sizes may vary slightly, since when talking about, for example, 60-80mm stone, it means that the stones pass through an 80x80mm square mesh and do not pass through a 60x60mm one.
Through that 80x80 mesh, a stone 100mm long and 65mm wide can pass, so there may be a percentage of stones larger than 80 and smaller than 60mm.
Breakage of pebbles
On the other hand, in pebbles larger than 60mm, there is a percentage of up to 10% of stones that can break during sorting, washing, loading and unloading; to this day we do not have machinery that prevents such breakages.
In the photos you can see, only real products are shown; broken pieces have not been removed.
Dust and sand in the products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; the stone will wash itself over time or you can pour water on it before using it.
Hoodie with a hood for children Elamorduele
Enjoy maximum comfort and durability with youth sweatshirt with heavy mixture hood. Ideal for active children, this hoodie, made of breathable cotton and resistant polyester, is designed to resist wear and frequent washing. With a light fleece and a practical front pocket, it is a safe complement to the closet of any child. The absence of laces guarantees security. Improve your child's comfort today!• 50% cotton, 50% polyester, with 20 filaments
• Tissue weight: 271.25 g/m² (8 oz./yd²)
• Polar tissue with average thickness
• 1 x 1 hem with spandex in fists for greater elasticity and flexibility
• Air Jet thread for a softer touch and avoid the formation of balls
• Front kangaro pocket
• Double lining hood
• Without laces for child safety
• Details with double stitch on the shoulders, sisas, neck, waist and fists
• Base product from Honduras
Discharge of responsibility: Due to the properties of the fabric, the white variant can be broken white instead of bright white.
Age Restrictions: For children
Eu Warranty: 2 years
OHER COMPLIAnce Information: meets the formaldehyde, flammability, lead, cadmium and phthalates levels. Meets the requirements of small items.
In accordance with the General Product Security Regulation (GPSR), Vetonek It guarantees that all the consumer products offered are safe and meet the EU standards. For any consultation or restlessness related to product security, get in touch with us in compras@vetonek.com or write us Donors 9 31590 Castejon is.
Size guide
| Length (cm) | Chest (cm) | Manga Largura (CM) | |
| Xs | 50.2 | 73.7-83.8 | 59.7 |
| S | 54 | 83.8-94 | 67.3 |
| M | 57.2 | 94-99 | 70.5 |
| L | 61 | 99-104.1 | 76.8 |
| XL | 64.8 | 104.1-109.2 | 83.8 |