Soil Revitalizer X3 | Dolomite Lime + Gypsum + Volcanic Lava
How much stone do I need?
How much stone do I need for the ground?
For pebble and gravel:
• approximately 80kg per m², based on a 5cm layer.*For particle sizes >32mm, a thicker layer is required.
• Consumption per sack: 1000kg = 0.625m³.
• Coverage: approximately 12.5m² with a 5 cm layer.
For pine bark:
• approximately 70L per m², based on a 5cm layer.
• Consumption per sack: 1000L = approximately 1m³ = approximately 600kg
• Coverage: approximately 14m² with a 5 cm layer.
For volcanic, slate and chamotte:
• approximately 50kg per m², based on a 5cm layer.
• Consumption per sack: 1000kg = approximately 1m³
• Coverage: approximately 20m² with a 5 cm layer
How much stone do I need to fill a gabion?
Density of approximately 1,650kg per 1m³.
The calculation is very easy to understand with an example: if you have a gabion of 100x50x30 cm, you must do the following calculations:
1x0.5x0.3 = 0.15m³
0.15x1,650 = 247.50kg of stone.
*It is always a good idea to calculate an extra 5%, since when gabions are filled they expand a little and a little more stone always fits than in the theoretical calculations.
Clarifications
ATTENTION!
The grain sizes of GRAVELS AND pebbles are sieve sizes
The actual sizes may vary slightly, since when talking about, for example, 60-80mm stone, it means that the stones pass through an 80x80mm square mesh and do not pass through a 60x60mm one.
Through that 80x80 mesh, a stone 100mm long and 65mm wide can pass, so there may be a percentage of stones larger than 80 and smaller than 60mm.
Breakage of pebbles
On the other hand, in pebbles larger than 60mm, there is a percentage of up to 10% of stones that can break during sorting, washing, loading and unloading; to this day we do not have machinery that prevents such breakages.
In the photos you can see, only real products are shown; broken pieces have not been removed.
Dust and sand in the products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; the stone will wash itself over time or you can pour water on it before using it.
Soil Revitalizer X3 | Dolomite Lime + Gypsum + Volcanic Lava
Soil Revitalizer X3
Product Description: The "Soil Revitalizer X3" is a powerful enriching blend designed for the comprehensive improvement of agricultural soil. This unique amendment combines dolomite lime, agricultural gypsum, and volcanic lava dust, providing an optimal balance of nutrients and structural improvements for the soil.
Composition:
- Dolomite Lime
- Agricultural Gypsum
- Volcanic Lava Dust
Key Benefits:
- Complete Nutritional Improvement: The combination provides a balanced supply of calcium, magnesium, and sulfate, along with the rich minerals from volcanic lava, including silicon, iron, and other trace elements.
- Soil Structure: Improves aeration and drainage, especially in heavy and clayey soils.
- pH Regulation: Dolomite lime and gypsum help neutralize acidic soils.
- Microbial Vitality: Volcanic lava dust promotes biological activity, increasing soil biodiversity.
- Resistance to Pests and Diseases: The silicon from volcanic lava strengthens plants against diseases and pests.
Recommended Applications:
- Ideal for all types of crops, especially vineyards, orchards, and gardens.
- Very effective in soils that require improvements in structure and nutritional balance.
- Suitable for the revitalization of depleted soils.
Usage and Application:
- General Dose: Apply between 3-6 kg per 100 m², depending on soil needs.
- Application: Distribute evenly over the soil surface and then lightly incorporate through tillage or plowing.
Available Presentations:
- Big Bag of 1,000 liters
- Bag 15 liters
Important:
- For professional use soils, it is recommended to consult with a soil expert to adjust the specific application.
- Ideal as a long-term solution to improve soil quality and health.