Grid Paver Grass 60x40 cm.
How much stone do I need?
How much stone do I need for the ground?
For pebble and gravel:
• approximately 80kg per m², based on a 5cm layer.*For particle sizes >32mm, a thicker layer is required.
• Consumption per sack: 1000kg = 0.625m³.
• Coverage: approximately 12.5m² with a 5 cm layer.
For pine bark:
• approximately 70L per m², based on a 5cm layer.
• Consumption per sack: 1000L = approximately 1m³ = approximately 600kg
• Coverage: approximately 14m² with a 5 cm layer.
For volcanic, slate and chamotte:
• approximately 50kg per m², based on a 5cm layer.
• Consumption per sack: 1000kg = approximately 1m³
• Coverage: approximately 20m² with a 5 cm layer
How much stone do I need to fill a gabion?
Density of approximately 1,650kg per 1m³.
The calculation is very easy to understand with an example: if you have a gabion of 100x50x30 cm, you must do the following calculations:
1x0.5x0.3 = 0.15m³
0.15x1,650 = 247.50kg of stone.
*It is always a good idea to calculate an extra 5%, since when gabions are filled they expand a little and a little more stone always fits than in the theoretical calculations.
Clarifications
ATTENTION!
The grain sizes of GRAVELS AND pebbles are sieve sizes
The actual sizes may vary slightly, since when talking about, for example, 60-80mm stone, it means that the stones pass through an 80x80mm square mesh and do not pass through a 60x60mm one.
Through that 80x80 mesh, a stone 100mm long and 65mm wide can pass, so there may be a percentage of stones larger than 80 and smaller than 60mm.
Breakage of pebbles
On the other hand, in pebbles larger than 60mm, there is a percentage of up to 10% of stones that can break during sorting, washing, loading and unloading; to this day we do not have machinery that prevents such breakages.
In the photos you can see, only real products are shown; broken pieces have not been removed.
Dust and sand in the products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; the stone will wash itself over time or you can pour water on it before using it.
Grid Paver Grass 60x40 cm.
Grid Paver Grass 60x40 cm. : Beauty, Functionality and Breathable Ground
This concrete grid paver is the ideal solution for those looking to create solid pavements without sacrificing the vitality of the garden. It combines the strength of concrete with the natural aesthetics of grass or gravel, allowing the ground to breathe and filter water naturally, which is essential in modern landscaping.
Main Features Bullet Points
-
Dimensions: 60 x 40 x 10 cm.
-
Smart Design: Incorporates 8 square holes designed to be filled with grass, sand or fine gravel.
-
Double Resistance: Suitable for pedestrian use and for light vehicle traffic.
-
Weight / Stability: Each piece weighs 30 kg (125 kg/m²), ensuring great firmness to the ground.
-
Aesthetics: Rustic stone finish and available in gray color.
The Perfect Balance: Practical, Beautiful and Eco-Friendly
1. Functionality and Hardness: Made of thick concrete, this paver offers the hardness and durability needed to create access to garages, paths and walkways. Once properly placed, it supports the weight of cars without problems.
2. Easy Installation: They are easy to place on a bed of gravel, sand or on the leveled ground itself, making it ideal for DIY projects.
3. Breathable Ground: This is its greatest ecological advantage. The grid minimizes cementing, allowing water filtration and soil transpiration, keeping the ecosystem alive beneath the pavement.
4. Aesthetic Combinations: The gray paver contrasts perfectly with the green of the grass or with the color of fine gravel (3-6 mm), ideal for designing gardens with color contrasts.
How is it installed?
Here are all the steps to follow for the installation of the grid paver grass.