Skip to product information
  • Compresor silencioso sin aceite 50 L bicilindrico Cevik Pro - Vetonek
  • Compresor silencioso sin aceite 50 L bicilindrico Cevik Pro - Vetonek

Silent oil-free compressor 50 L - 2.8 HP and 300 L/min twin-cylinder

293,02 €
293,02 € 299,00 €
You save 2% (5,98 €)
Tax included. Shipping calculated at checkout.
Envase

Silent oil-free compressor 50 L - 2.8 HP and 300 L/min twin-cylinder

Silent oil-free 50-liter compressor with two heads

When a 1.5 HP silent compressor falls short, the answer is not to go up in tank size: it is to increase airflow. This unit mounts two twin-cylinder heads that work in parallel and deliver 300 L/min, twice that of a conventional silent compressor, without exceeding 65 dB.

Distributing the work between two heads has a direct consequence: each one works half as hard, heats up less, and lasts longer. And because it is oil-free, the air comes out clean for painting and precision pneumatics without additional filters.

✅ Main advantages

  • 300 L/min at 8 bar: airflow for tools with sustained consumption.
  • Two twin-cylinder heads: less load per head, lower temperature, longer life.
  • 65 dB: workshop power without workshop noise.
  • Oil-free: clean air from the start and zero crankcase maintenance.
  • 50 liters on wheels to move it around the workshop.

🏗️ What it is for

  • Spray painting with the need for continuous air.
  • Mechanical workshop: impact wrenches, ratchets, and air blowing.
  • Carpentry with several nailers at once.
  • Workshops open to the public where noise is a disadvantage.

📋 Technical sheet

  • Power: 2.8 HP
  • Maximum pressure: 8 bar
  • Flow rate: 300 L/min
  • Speed: 1,400 rpm
  • Tank capacity: 50 liters
  • Noise level: 65 dB
  • Configuration: two twin-cylinder heads
  • Lubrication: oil-free

💡 Professional tip: with two heads, the electrical demand at startup is high. Check that the line can handle it: 2.8 HP in single-phase require an adequately sized residual-current device and circuit breaker and, above all, no thin extension cords. A 25-meter 1.5 mm² cable causes voltage drops that trigger the motor’s thermal protection and can end up burning it out.