Concrete block pillar piece LISA (Copy)
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Concrete block pillar piece LISA (Copy)
🏗️ Concrete Block: Smooth Water-Repellent Pillar Piece
Discover the Water-repellent Smooth Pillar Piece, ideal for your construction and decoration projects, available in elegant colors white, cream and gray.
This pillar of smooth finish not only provides a modern and clean aesthetic, but also offers superior functionality thanks to its water-repellent treatment, making it resistant to humidity and standing out from other traditional options on the market.
DIMENSIONS AVAILABLE
29x29x19cm
39x39x19cm
PRODUCT FEATURES
Available Colors: White, Cream and Grey.
Water Absorption by Capillarity: Xi <= 4.2 / X3 <= 3, certifying its ability to resist challenging climatic conditions.
Absolute Density: 2200 +/- 10% Kg/m3
Apparent Density: 1100 +/- 10% Kg/m3
STRENGTH AND PACKAGING
Normalized Compression Strength (fb): 5 N/mm2
Accepted Compression Strength: fb. >= 4 N/mm2 for supporting factories and >= 3 N/mm2 for supported factories
PACKAGING OPTIONS
Unit: Ideal for when you need specific quantities.
Pallet of 54 Units: All pallets are delivered with unloading included, facilitating logistics and handling on site.
✅ Key Benefits
The Water-Repellent Smooth Pillar Piece is perfect for a variety of construction and decoration applications. Its robust and aesthetic design makes it the ideal option for creating both interior and exterior structures, offering a exceptional performance and durability in all types of environmental conditions.
The variety of sizes and colors allows it to be perfectly integrated into any architectural design.
Choose the Water-Repellent Smooth Pillar Piece as the perfect solution for your work, where the combination of aesthetics and resistance become essential.