Terracotta Garden Slab
How much stone do I need?
How much stone do I need for the ground?
For pebble and gravel:
• approximately 80kg per m², based on a 5cm layer.*For particle sizes >32mm, a thicker layer is required.
• Consumption per sack: 1000kg = 0.625m³.
• Coverage: approximately 12.5m² with a 5 cm layer.
For pine bark:
• approximately 70L per m², based on a 5cm layer.
• Consumption per sack: 1000L = approximately 1m³ = approximately 600kg
• Coverage: approximately 14m² with a 5 cm layer.
For volcanic, slate and chamotte:
• approximately 50kg per m², based on a 5cm layer.
• Consumption per sack: 1000kg = approximately 1m³
• Coverage: approximately 20m² with a 5 cm layer
How much stone do I need to fill a gabion?
Density of approximately 1,650kg per 1m³.
The calculation is very easy to understand with an example: if you have a gabion of 100x50x30 cm, you must do the following calculations:
1x0.5x0.3 = 0.15m³
0.15x1,650 = 247.50kg of stone.
*It is always a good idea to calculate an extra 5%, since when gabions are filled they expand a little and a little more stone always fits than in the theoretical calculations.
Clarifications
ATTENTION!
The grain sizes of GRAVELS AND pebbles are sieve sizes
The actual sizes may vary slightly, since when talking about, for example, 60-80mm stone, it means that the stones pass through an 80x80mm square mesh and do not pass through a 60x60mm one.
Through that 80x80 mesh, a stone 100mm long and 65mm wide can pass, so there may be a percentage of stones larger than 80 and smaller than 60mm.
Breakage of pebbles
On the other hand, in pebbles larger than 60mm, there is a percentage of up to 10% of stones that can break during sorting, washing, loading and unloading; to this day we do not have machinery that prevents such breakages.
In the photos you can see, only real products are shown; broken pieces have not been removed.
Dust and sand in the products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; the stone will wash itself over time or you can pour water on it before using it.
Terracotta Garden Slab
Terracotta Garden Slabs - Rustic Elegance for Your Outdoor Spaces
Discover the latest novelty from Vetonek.com: our exclusive Terracotta Garden Slabs, available in charming toasted and orange/red colors. With a thickness of 4 cm, these slabs are perfect for creating paths, garden walkways, home entrances, and much more. Their versatility allows them to be laid with mortar or simply on a sand bed. Available in square, rectangular, and round shapes, they offer multiple options to customize your space.
Quality and Durability for Outdoors
Our slabs are made from high-quality terracotta, specifically designed to withstand outdoor conditions. The irregular finish and artisanal texture provide a rustic look, evoking the typical beauty of Mediterranean patios and terraces. Each piece of terracotta has a unique touch, reflecting the authenticity of its handcrafted production process.
Design Flexibility
Gardens, patios, and terraces are havens of peace and tranquility. That’s why our Terracotta Garden Slabs offer great flexibility of use, allowing you to experiment with different patterns and configurations. Both designers and architects find in this material a source of inspiration to transform outdoor spaces into landscapes filled with elegance and balance. Ideal for gardens, porches, terraces, and pergolas, our slabs convey a sense of continuity that integrates the aesthetics of your home.
Installation Methods
Thin Layer: For leveled bases, thin layer installation with tile adhesive is recommended. This technique, with a thickness of 5 to 10 mm, allows for quick drying and prevents the appearance of efflorescence, facilitating the subsequent treatment of the clay.
Thick Layer: If the base is uneven, use a thick layer of mortar and place the wet terracotta pieces directly on it. This method ensures a solid fixation but requires more drying time. For both techniques, we advise using joints of 5 to 10 mm to accommodate the natural contractions and expansions of the material. Avoid pigments in the joint to prevent stains.
Treatment and Maintenance
Vetonek offers factory pre-treated materials to facilitate their use and finish. The treatment of the clay consists of three steps: cleaning, waterproofing, and finishing.
Construction Cleaning: It is crucial to remove cement residues and stains before any treatment.
Waterproofing: Outdoors, it is not recommended, except in areas like barbecues. Indoors, it is essential to prevent stains. Water repellents or oils can be used to reduce absorption.
Finishes: Apply waxes or oils according to the desired finish (matte, satin, glossy). Colored waxes can give additional effects like a dark leather finish.
*This is not a rectified material, which means that the measurements may vary between 1 and 2 centimeters, considering the measurements of the joint in its final placement.
A 100% Ecological and Natural Product
The Terracotta Garden Slabs are a traditional and ecological product, respectful of the environment. By choosing our materials, you help preserve the planet and reduce the environmental impact in construction. The handcrafted production guarantees irregular edges that provide authenticity and uniqueness to each piece.
Transform your outdoor spaces with the elegance and durability of our Terracotta Garden Slabs. Vetonek.com, where tradition meets innovation.