High Steel Jardinera Corten
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
High Steel Jardinera Corten
High quality corten steel sheet gardeners
Discover ours GARDENERAS MANUFACTURED IN CORTEN STEEL CHAPE, a resistant and durable material with a thickness of 1.5 mm. Thanks to a Oxide finish achieved through a process of Forced oxidation and a treatment of oxide hostel, these gardeners are not only aesthetic, but also functional.
Product characteristics
- Waterproofing interior: Waterproofing paint that generates a totally stagnant container, ideal for use both indoors and exterior.
- Embutid feet: Made with feet of 20 mm in diameter and 5 mm high, designed to be invisible and provide stability.
- Upper resistant edge: With a thickness of 15 mm, the edge gives a solid sensation of robustness.
- Variety of designs: Available in three different ways, all include a false background at medium height to improve drainage.
Personalization and delivery deadlines
If you need a hole in the background For drainage, do not hesitate to request it when making your order. The Delivery deadlines For our gardeners they are approximately Between 8 and 16 working days.
Transform your space with our Corten steel gardeners, where quality and the design They come together to offer you exceptional products.