Solar salt for pools alternative to chlorine
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Solar salt for pools alternative to chlorine
Vetonek Solar Pool Salt: The pleasure of a natural bath
Transform your pool into an oasis of well-being with the Vetonek Solar Salt. Saline electrolysis is the most advanced and healthy alternative to traditional chlorine, allowing effective, ecological disinfection that is much kinder to your skin and eyes.
🌊 A healthier bathroom, purer water
Forget about irritations and the strong smell of chemicals. By choosing the salt system for your pool, you gain quality of life:
-
Total comfort: Prevents itchy eyes and dry skin or hair.
-
Guaranteed security: You eliminate the need to handle and store dangerous chemicals derived from chlorine.
-
Smart savings: Drastically reduces spending on maintenance and corrective products.
☀️ Natural Crystallization: The power of the sun and the wind
Our salt is not a processed industrial product; It is the result of a process of natural crystallization through the action of the sun and the wind.
-
Real Sustainability: An environmentally friendly process that reduces the carbon footprint in your supply chain.
-
Certified Purity: We strictly comply with the standard UNE-EN 16401, guaranteeing optimal operation of your salt chlorinator and extending its useful life.
✅ Vetonek Technical Advantages
-
Quick Dissolution: Thanks to our special formulation, the salt dissolves immediately, allowing direct dosage into the pool glass without leaving residue.
-
Superior Quality: Solar Salt with a purity of NaCl ≥98.5%, designed to maximize electrolysis performance.
-
Permanent Service: We guarantee continuous stock and agile supply thanks to our extensive experience in water treatment.
📋 Product Specifications
-
Range: High purity Solar Salt.
-
Granulometry: Coarse (0mm – 10mm) for balanced dissolution.
-
Humidity: <5%.
-
Format: 25 kg bags (Palletizing: 40 bags per Europallet).
"Switch to natural disinfection with Vetonek and enjoy crystal clear water, taking care of your loved ones and the environment."