Splash pool with hanging skimmer and 350x90 cm gray pump
How much stone do I need?
How much stone do I need for the ground?
For pebble and gravel:
• approximately 80kg per m², based on a 5cm layer.*For particle sizes >32mm, a thicker layer is required.
• Consumption per sack: 1000kg = 0.625m³.
• Coverage: approximately 12.5m² with a 5 cm layer.
For pine bark:
• approximately 70L per m², based on a 5cm layer.
• Consumption per sack: 1000L = approximately 1m³ = approximately 600kg
• Coverage: approximately 14m² with a 5 cm layer.
For volcanic, slate and chamotte:
• approximately 50kg per m², based on a 5cm layer.
• Consumption per sack: 1000kg = approximately 1m³
• Coverage: approximately 20m² with a 5 cm layer
How much stone do I need to fill a gabion?
Density of approximately 1,650kg per 1m³.
The calculation is very easy to understand with an example: if you have a gabion of 100x50x30 cm, you must do the following calculations:
1x0.5x0.3 = 0.15m³
0.15x1,650 = 247.50kg of stone.
*It is always a good idea to calculate an extra 5%, since when gabions are filled they expand a little and a little more stone always fits than in the theoretical calculations.
Clarifications
ATTENTION!
The grain sizes of GRAVELS AND pebbles are sieve sizes
The actual sizes may vary slightly, since when talking about, for example, 60-80mm stone, it means that the stones pass through an 80x80mm square mesh and do not pass through a 60x60mm one.
Through that 80x80 mesh, a stone 100mm long and 65mm wide can pass, so there may be a percentage of stones larger than 80 and smaller than 60mm.
Breakage of pebbles
On the other hand, in pebbles larger than 60mm, there is a percentage of up to 10% of stones that can break during sorting, washing, loading and unloading; to this day we do not have machinery that prevents such breakages.
In the photos you can see, only real products are shown; broken pieces have not been removed.
Dust and sand in the products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; the stone will wash itself over time or you can pour water on it before using it.
Splash pool with hanging skimmer and 350x90 cm gray pump
Have lots of fun in your backyard with family and friends in this splashing pool with accessories. Made of steel and blue PVC liner, this pool is durable and sturdy. It is also easy to set up and take down, which is very convenient. The combination of the pool skimmer and surface pump is the best way to clean debris from above-ground pools! It can be easily mounted on the pool wall to remove floating leaves or other debris. This skimmer is made of corrosion-resistant plastic material. Therefore, it can withstand even the harshest pool chemicals. It has an adjustable mounting bracket so it can move according to the waterline of the pool surface. The pool skimmer has a capacity of 1700 l/h and operates at 12 volts. No additional hoses or adapters are needed, the filter is easy to use. In addition, with the removable basket, you can easily empty the skimmer when it is full.
- Splash pool:
- Color: Gray and blue
- Material: Steel, PVC
- Dimensions: 350 x 90 cm (diameter x height)
- Steel wall thickness: 0.3 mm
- PVC liner thickness: 0.3 mm
- Capacity: 7200 L (1900 gal)
- Easy to assemble and disassemble
- Hanging skimmer with pump:
- Color: White and blue
- Material: Plastic
- Total dimensions: 16 x 37 cm (diameter x height)
- Filter capacity: 2.8 L
- Pump flow rate: 1700 l/h
- Power: 12 V, 20 W (with 230 V transformer)
- Suitable for above-ground pools
- Assembly required: Yes
- Delivery includes:
- 1 x Splash pool
- 1 x Hanging skimmer with pump