Duero Wall Coping 1 m - Flat Slab with Half the Joints and Zero Rust
Duero Wall Coping 1 m: the large-format flat slab
Every joint in a coping is a spot where water can get in. The 1-metre Duero Wall Coping halves the number of joints compared with traditional 50 cm pieces, and it's made from HAP concrete with no internal reinforcement, so there's no steel to rust and crack the piece over the years either.
✅ Key advantages
Large 100 cm format: half the joints, less layout work and noticeably faster installation.
Built-in drip edge: keeps rainwater off the masonry and the façade free of streaking.
No internal reinforcement: zero risk of bursting or rust stains.
Flat surface: a firm base for trellises, balustrades or planters.
4 colours: Grey, White, Beige and Black to match the façade.
🏗️ Recommended applications
Capping for large-scale enclosure walls.
Terrace and rooftop parapets.
Garden walls and built-in planters.
Boundaries between plots and perimeter fencing.
📋 Technical data sheet
Material: HAP concrete with selected natural aggregates.
Profile: flat slab with underside drip edge.
Sizes: 100 × 25 × 4 cm and 100 × 30 × 4 cm.
Pieces per linear metre: 1.
Units per pallet: 38 for both sizes.
Colours: Grey, White, Beige and Black.
Reinforcement: none.
🧰 Installation
Level and clean the top of the wall before starting.
Dry-lay the whole course first and place the adjustment cut towards the middle, never at the end.
Spread flexible bonding mortar with a continuous bead along both edges.
Position each piece with two people, with the same overhang on each side, and adjust with a rubber mallet.
Leave a 3-5 mm joint and fill it with elastic pointing mortar.
Remove excess with a damp sponge and protect from rain for the first 24 hours.
📦 Available formats
Single unit.
Pallet of 38 units.
💡 Professional tip: with 1-metre pieces, the top of the wall needs to be well levelled beforehand. Bonding mortar isn't meant to build up height: if you try to correct an unevenness of more than 1 cm with extra mortar, the slab ends up bearing unevenly and cracks down the middle at the first hard frost. Level it first with levelling mortar and let it set.
Frequently Asked Questions
¿Cuántas piezas necesito por metro lineal?
Una sola, la pieza mide 100 cm de largo.
¿Qué ancho elijo?
El del muro más 4-6 cm, para que vuele 2-3 cm por cada cara.
¿Cuántas unidades trae el palet?
38, tanto en 25 como en 30 cm de ancho.
¿Puede oxidarse?
No, la pieza se fabrica sin armadura interna.
¿Pesa mucho para colocarla solo?
Una pieza de 1 metro es un trabajo de dos personas; conviene ayuda o usar ventosas.
¿Con qué se pega?
Con mortero de agarre flexible para exterior.
¿Hay que dejar junta entre piezas?
Sí, de 3 a 5 mm rellena con mortero elástico de rejuntado.
¡Un servicio excelente! Personal muy amable, atento y profesional. Desde el primer momento te hacen sentir muy bien atendido y se nota que realmente se preocupan por la satisfacción del cliente. Una experiencia fantástica y totalmente recomendable. ¡Muchas gracias por la excelente atención!
