A rough finish ruins a modern façade, and a reinforced coping eventually bursts from rust. This piece solves both problems: a large-format smooth finish and manufacture with no internal reinforcement, with a double slope and drip edge so the water is drained away instead of running down the wall.
✅ Key advantages
Large-format smooth finish: a clean, contemporary look for demanding projects.
Double slope and drip edge: effective water drainage and less dirt on the façade.
No internal reinforcement: zero rust bursting, maximum durability.
1-metre piece: half the joints of a 50 cm coping.
High-strength cement: good performance against frost, thaw and urban pollution.
🏗️ Recommended applications
Capping for exposed walls on new builds and careful renovations.
Terrace and rooftop parapets.
Party walls and plot enclosures.
Pool copings and outdoor seating areas.
📋 Technical data sheet
Material: HAP concrete with selected natural aggregates and high-strength cement.
Finish: smooth.
Profile: double slope with drip edge.
Sizes: 100 × 25 × 3 × 4.5 cm and 100 × 30 × 3 × 4.5 cm.
Weight: 22 kg per piece.
Units per pallet: 37 for the 25 cm width and 32 for the 30 cm width.
Colours: White, Beige and Cement Grey.
🧰 Installation
Level the top of the wall; with 1-metre pieces, any unevenness stands out a lot.
Mark the centre line of the wall with a string to centre the ridge.
Spread flexible bonding mortar over the entire bearing surface.
Position the piece with two people, holding it by the ends.
Leave a 3-5 mm joint and point it with elastic mortar matching the piece's tone.
Clean off excess while fresh with a sponge and clean water.
📦 Available formats
Single unit.
Full pallet (37 units at 25 cm · 32 units at 30 cm).
💡 Professional tip: at 22 kg and a metre long, this piece doesn't forgive poor support. Always unload it onto wooden battens and never leave it standing on edge against a wall: a small nudge is enough for it to fall and break. On site, allow for 5% extra pieces just for handling breakages.
Frequently Asked Questions
¿Cuánto pesa cada pieza?
Unos 22 kg, es trabajo de dos personas.
¿Cuántas unidades trae el palet?
37 en el ancho de 25 cm y 32 en el de 30 cm.
¿En qué se diferencia del acabado estándar?
En la textura de la cara vista, aquí lisa y con cantos más definidos.
¿Puede reventar por óxido?
No, la pieza no lleva armadura interna.
¿Cuántas piezas por metro lineal?
Una.
¿Qué mortero uso?
Mortero de agarre flexible para exterior.
¿Hay que limpiar el mortero en fresco?
Sí, sobre acabado liso el velo de cemento seco cuesta mucho de quitar.
¡Un servicio excelente! Personal muy amable, atento y profesional. Desde el primer momento te hacen sentir muy bien atendido y se nota que realmente se preocupan por la satisfacción del cliente. Una experiencia fantástica y totalmente recomendable. ¡Muchas gracias por la excelente atención!
