Sabina Path Slab - Straight and Curved Format in Three Tones
Sabina Path Slab: straight or curved shape and a shaded tone
The trouble with precast slabs is that every piece comes out identical and the path reads as factory-made paving. The Sabina range avoids that two ways: three shaded tones that bring in natural variation, and two piece shapes, rectangular and curved, to choose between minimalist and organic.
✅ Key advantages
Shaded tone: colour variation between pieces that mimics the way natural stone behaves.
Two geometries: the 45 × 30 cm rectangular piece gives a contemporary finish; the 35 × 35 and 59 × 43 cm curved pieces give an organic, random layout.
Three colours: Limestone, Cream and Pirineos, which can be combined with each other.
Uniform 3.5 cm thickness: all three formats sit flush at the same level.
Large format available: the 59 × 43 cm piece covers a path with few units.
🏗️ Recommended applications
Garden paths and trails.
Paving terraces and porches.
Outdoor seating and relaxation areas.
Organic routes between planted areas.
Pedestrian access to homes.
📋 Technical data sheet
Rectangular format: 45 × 30 × 3.5 cm — 9.8 kg.
Small curved format: 35 × 35 × 3.5 cm — 7.7 kg.
Large curved format: 59 × 43 × 3.5 cm — 15 kg.
Material: concrete with a shaded finish.
Colours: Limestone, Cream and Pirineos.
Units/pallet: 96 at 45 × 30 cm, 44 at 35 × 35 cm and 48 at 59 × 43 cm.
🧰 Installation
Set out the route and decide in advance whether the path will be straight or curved.
Excavate about 10 cm and compact a 6 cm sub-base of crushed aggregate.
Spread 3 cm of levelling sand and screed it off.
Open several pallets at once and mix pieces to spread out the tone variation.
Bed the slabs with a rubber mallet, keeping a constant joint.
Brush fine sand into the joints and water at low pressure.
📦 Available formats
45 × 30 × 3.5 cm in Limestone, Cream and Pirineos — single unit or pallet of 96 units.
35 × 35 × 3.5 cm in Limestone, Cream and Pirineos — single unit or pallet of 44 units.
59 × 43 × 3.5 cm in Limestone, Cream and Pirineos — single unit or pallet of 48 units.
💡 Professional tip: with a shaded product, open several pallets at once and mix pieces as you lay them. Empty one pallet at a time and the path ends up with obvious patches: one stretch lighter, another darker. The shading is only an asset when the variation is spread across the whole surface.
Frequently Asked Questions
¿Se puede instalar Losa de Sendero Sabina - formato recto y sinuoso en tres tonos en exterior?
Sí, es apta para uso exterior, resistente a la intemperie, las heladas y el tránsito peatonal habitual de un jardín o terraza.
¿Es antideslizante?
Consulta la ficha técnica del producto; muchos de nuestros modelos de losas ofrecen acabados antideslizantes recomendados para zonas de paso.
¿Cómo se instala, con mortero o en seco?
Se puede instalar tanto con mortero sobre una base de hormigón como en seco, sobre una cama de arena o grava compactada, según el uso que le vayas a dar (zona de paso, jardín, terraza).
¿Se puede cortar para ajustar las medidas?
Sí, se puede cortar con radial y disco adecuado para el material, para ajustarla al espacio disponible.
¿Necesita algún mantenimiento especial?
No requiere mantenimiento especial. Se recomienda una limpieza periódica con agua y, opcionalmente, aplicar un hidrofugante para facilitar la limpieza y proteger la superficie con el paso del tiempo.
¡Un servicio excelente! Personal muy amable, atento y profesional. Desde el primer momento te hacen sentir muy bien atendido y se nota que realmente se preocupan por la satisfacción del cliente. Una experiencia fantástica y totalmente recomendable. ¡Muchas gracias por la excelente atención!
