How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Dry Gem Salt for Animal Feed
Mineravi Natural Gem Salt: Essential Nutrition and Mineral Purity
The Mineravi Gem Salt It is the fundamental ally to guarantee the health and performance of your livestock. Unlike other processed salts, our mineral is extracted directly from underground deposits formed millions of years ago, offering a product of exceptional purity that has not been altered by modern environmental pollution.
🐄 The engine of animal health
Salt is the mineral that activates the body. With the guarantee of Mineravi, this supplement acts on three key pillars:
-
Appetite stimulant: Promotes constant feed intake, improving growth and production rates.
-
Metabolic regulator: Controls the balance of fluids and electrolytes, vital to avoid dehydrating stress in livestock.
-
Life support: Essential for efficient digestion and a balanced nervous system.
🌿 Mineravi Quality: Without chemical processes
At Mineravi we believe in minimal intervention to obtain maximum benefit. Our Gem Salt is a product completely natural.
-
It does not undergo chemical concentration processes.
-
It maintains its original mineral properties intact.
-
It is presented in a dry and clean format, ready to be integrated into any nutritional process.
✅ Technical Applications
-
Feed Manufacturing: Thanks to its excellent fluidity and dry state, it is the perfect ingredient for feed manufacturing plants, ensuring precise and homogeneous mixtures.
-
Mineral Supplementation: Ideal for the production of high-end concealers and mineral blocks.
-
Multispecies Use: Formulated to meet the needs of cattle, sheep, pigs, goats and horses.
📋 Product Specifications
-
Brand: Mineravi.
-
Nature: Natural Gem Salt (Mine Salt).
-
Treatment: Extraction and mechanical drying (No additives).
-
Advantage: High bioavailability and guaranteed purity.
Ensure the vitality of your animals with Mineravi Gem Salt: the mineral origin of livestock health.