Belt compressor 150 L - 3 HP and 365 L/min, single-phase or three-phase
150-litre belt-driven compressor
The step up to 150 litres is made for a specific reason: when you have several air outlets and do not know how many will be used at the same time. With that reserve, the compressor absorbs the overlaps without anyone's tool pressure dropping.
It fits a 3 HP unit at 1,375 r.p.m. with belt transmission and delivers 365 L/min at 10 bar. Available in 230 V single-phase and 400 V three-phase: the same performance, so choose according to the installation in your premises.
✅ Main advantages
150 litres of reserve: absorbs simultaneous demand without the pressure dropping.
365 L/min at 10 bar sustained.
Two electrical versions: single-phase 230 V or three-phase 400 V.
1,375 r.p.m.: low speed, little wear, little noise.
Belt transmission for continuous use.
🏗️ What it is for
Workshop pneumatic installations with several air outlets.
Mechanics and bodywork workshops with two or three operators.
Painting, pneumatic sanding and impact tools.
Industrial carpentry and small assembly lines.
📋 Technical specifications
Voltage: 230 V (CA-PRO150-3MF) or 400 V three-phase (CA-PRO150-3TF)
Power: 3 HP
Maximum pressure: 10 bar
Flow rate: 365 L/min
Speed: 1,375 r.p.m.
Air tank capacity: 150 litres
Transmission: belt
💡 Professional tip: from 100 litres upwards the air tank falls within the scope of the Spanish pressure equipment regulations and requires periodic inspection. File the declaration of conformity and the tank plate the day it is delivered to you: recovering that documentation years later is a headache that a single folder avoids.
Frequently asked questions
What is the 150-litre air tank for?
To absorb simultaneous demand without the tool pressure dropping. With 365 L/min at 10 bar it is suitable for workshops with several air outlets.
Single-phase or three-phase?
There are two versions with the same performance: CEVIK-CA-PRO150-3MF at 230 V and CEVIK-CA-PRO150-3TF three-phase at 400 V. The three-phase model can only be connected to a 400 V three-phase socket.
Does the tank need inspection?
From 100 litres upwards the air tank falls within the scope of the Spanish pressure equipment regulations, which may require periodic inspections. Keep the declaration of conformity and the tank plate.
Is it suitable for professional work?
Yes: 3 HP, belt transmission at 1,375 r.p.m. and a lubricated head for continuous use in workshops with two or three operators, industrial carpentry or painting.
Where should I install it?
In a ventilated, level place and, if possible, on anti-vibration pads. Drain the condensate from the air tank regularly.
