Skip to product information
  • Compresor de correas de 200 L y 4 HP Vica Work - Vetonek
  • Compresor de correas de 200 L y 4 HP Vica Work - Vetonek

Belt compressor 200 L - 4 HP and high-performance 539 L/min

1.224,02 €
1.224,02 € 1.249,00 €
You save 2% (24,98 €)

Delivery in 3–9 days

Tax included. Shipping calculated at checkout.
Power supply

Belt compressor 200 L - 4 HP and high-performance 539 L/min

200-litre, 4 HP belt-driven compressor

With 539 L/min at 10 bar, this unit covers what no 3 HP compressor can: genuinely continuous consumption. Pneumatic orbital sanders, small sandblasters, two spray guns working at once. Tools that do not ask for air in bursts, but without stopping.

It features a high-performance head with belt transmission at 1,400 r.p.m. on a 200-litre air tank. Available in 230 V single-phase and 400 V three-phase, at the same price: if you have a three-phase supply in your premises, choose that version without hesitation.

✅ Main advantages

  • 539 L/min: flow for continuous-consumption tools.
  • High-performance head: more air per revolution and better cooling.
  • 200 litres of reserve for simultaneous peaks.
  • Single-phase or three-phase with no price difference.
  • 10 bar with belt transmission at low speed.

🏗️ What it is for

  • Pneumatic sanding and bodywork preparation.
  • Paint booths with continuous consumption.
  • Industrial unit installations with several simultaneous workstations.
  • Metalwork, industrial maintenance and large workshops.

📋 Technical specifications

  • Voltage: 230 V (CA-PRO200-4MF) or 400 V three-phase (CA-PRO200-4TF)
  • Power: 4 HP
  • Maximum pressure: 10 bar
  • Flow rate: 539 L/min
  • Speed: 1,400 r.p.m.
  • Air tank capacity: 200 litres
  • Transmission: belt
  • Head: high-performance

💡 Professional tip: both versions cost the same, so the decision is purely down to the installation. Mind one detail: the three-phase version does not have built-in thermal protection like the single-phase one; a calibrated motor protection switch has to be fitted in the panel. If you do not fit one and a phase fails, the motor burns out without warning.

Frequently asked questions

What tools can I use with 539 L/min?

With 539 L/min at 10 bar it can supply continuous-consumption tools: pneumatic orbital sanders, small sandblasters or two spray guns at once. Check the consumption of each tool.

What is the difference between 4 HP and 3 HP?

With 4 HP and a high-performance head at 1,400 r.p.m. the flow rises to 539 L/min, compared with the 365 L/min of the 3 HP belt-driven models.

Single-phase or three-phase?

Both versions cost the same: CEVIK-CA-PRO200-4MF at 230 V and CEVIK-CA-PRO200-4TF at 400 V. If you have a three-phase supply in your premises, it is the best option; if not, the single-phase one.

Does the three-phase version need any protection?

According to the specification sheet it does not have built-in thermal protection like the single-phase one, so a calibrated motor protection switch has to be fitted in the electrical panel.

Is it suitable for a paint booth?

Yes, it is intended for paint booths with continuous consumption and for workshops with several workstations, with 200 litres of reserve to absorb peaks.

Frequently Asked Questions