Semi-professional compressor 100 L - 3 HP and 357 L/min with V-head

322,42 €
322,42 € 329,00 €
You save 2% (6,58 €)

Delivery in 3–9 days

Tax included. Shipping calculated at checkout.
Packaging

Semi-professional compressor 100 L - 3 HP and 357 L/min with V-head

Semi-professional 100-litre compressor with V-twin pump head

The same 3 HP, 357 L/min unit from the V-twin range, mounted on a 100-litre air tank. With that reserve, the compressor stops starting continuously and moves to long, spaced-out cycles, which is what gives a direct-drive motor years of life.

It is the logical choice when you want a compressor fixed in the workshop but do not have three-phase power: it feeds a small air installation with several outlets from a 230 V socket.

✅ Main advantages

  • 100-litre air tank: the largest reserve in the direct-drive single-phase range.
  • 357 L/min at 8 bar thanks to the twin-cylinder V pump head.
  • Long cycles: fewer starts, less wear, less accumulated noise.
  • 3 HP at 230 V: power without a three-phase installation.
  • On wheels despite its size.

🏗️ What it is used for

  • Fixed air installation in a small workshop or professional garage.
  • Spray painting and bodywork.
  • Several air outlets for tools in intermittent use.
  • Carpentry, assembly and light industrial maintenance.

📋 Technical specifications

  • Voltage: 230 V
  • Power: 3 HP
  • Maximum pressure: 8 bar
  • Flow rate: 357 L/min
  • Speed: 2,950 r.p.m.
  • Air tank capacity: 100 litres
  • Pump head: V-twin

💡 Professional tip: if you leave it in a fixed position, build the installation with a slight downward slope and the outlets leaving from the top of the pipe, in a swan-neck shape. That way the condensed water keeps running down the pipework to a drain point instead of sneaking into the tools. It is the difference between an installation that gives trouble every week and one that gives none.

Frequently asked questions

What does the 100-litre air tank offer?

With so much reserve the compressor runs long, spaced-out cycles instead of starting continuously, which extends the life of a direct-drive motor.

Is it suitable for a fixed workshop without three-phase power?

Yes. With 3 HP it works at 230 V and can feed a small air installation with several outlets in intermittent use.

How should the fixed installation be set up?

With a slight downward slope and the outlets leaving from the top of the pipe, in a swan-neck shape, so that the condensed water runs down to a drain point and does not reach the tools.

Can it be moved despite its size?

Yes, although it has 100 litres it runs on wheels.

What flow rate and pressure does it deliver?

It delivers 357 L/min at 8 bar with a V-twin pump head, suitable for spray painting and bodywork.

Frequently Asked Questions