Ultra-quiet oil-free compressor 25 L - 1.5 HP and 59 dB
Ultra-quiet oil-free compressor, 25 litres
A workshop compressor that makes less noise than your customers' conversation. With 59 dB and 150 L/min, it is the combination sought by workshops open to the public, shops and premises where a racket is out of the question.
The 25-litre air tank gives it room to work without starting every few moments, and the oil-free pump head delivers clean air directly: no coalescing filters and no lubricant stains on freshly applied varnish.
✅ Main advantages
59 dB: library-quiet for a 25-litre compressor.
150 L/min at 8 bar: real working flow, not a catalogue figure.
Oil-free: clean air and maintenance kept to a minimum.
1,400 r.p.m. motor: it turns slowly and lasts longer.
25 litres and wheels: autonomy and mobility around the workshop.
🏗️ What it is used for
Workshops and shops with customers inside.
Spray painting and finishes where clean air is critical.
Nailers, staplers and light pneumatic tools.
General inflating, blowing and cleaning.
📋 Technical specifications
Power: 1.5 HP
Maximum pressure: 8 bar
Flow rate: 150 L/min
Speed: 1,400 r.p.m.
Air tank capacity: 25 litres
Noise level: 59 dB
Lubrication: oil-free
💡 Professional tip: being oil-free does not mean the air comes out dry. Moisture still condenses inside the air tank, and in painting that means craters in the finish. Fit a filter regulator with a water separator just before the spray gun and drain the tank at the end of every working day.
Frequently asked questions
How much noise does this 25-litre compressor make?
It runs at 59 dB, the lowest level in the range. It is suitable for workshops open to the public, shops and premises where noise is a problem.
Is it suitable for spray painting?
Yes. It is an oil-free compressor, so the air comes out without lubricant. With 150 L/min at 8 bar it suits finishes and moderate-use spray painting. It is advisable to fit a filter regulator with a water separator and to drain the tank.
Does it need oil or crankcase maintenance?
No, it is oil-free and lubricant maintenance is nil. Condensed water still forms in the air tank, so it needs to be drained.
Which tools can I use with 150 L/min?
Nailers, staplers, light pneumatic tools, spray guns, inflating and blowing. Its motor is 1.5 HP and 1,400 r.p.m.
Can it be moved around the workshop?
Yes, it has wheels. Its 25-litre tank gives room to work without the motor starting constantly.
