Ultra-quiet oil-free compressor 80 L - 3 HP and 350 L/min at 59 dB
Ultra-quiet oil-free compressor, 80 litres
Three horsepower, 350 L/min and still only 59 dB. It is the hardest combination to find on the market: workshop power with the noise level of a desktop compressor.
It achieves this with two twin-cylinder pump heads turning at only 1,200 r.p.m., the lowest speed in the whole quiet range. Fewer revolutions mean less noise, less vibration and much slower wear. And being oil-free, the air comes out clean with nothing further to add.
✅ Main advantages
59 dB with 3 HP: the best power-to-noise ratio in the catalogue.
350 L/min at 8 bar for several air outlets at once.
Motor at 1,200 r.p.m.: the slowest in the range, and the longest-lasting.
80 litres of reserve: autonomy for peaks in demand.
Oil-free: clean air for painting and sensitive equipment.
🏗️ What it is used for
Bodywork and paint shops in areas with noise limits.
Fixed pneumatic installations in small workshops.
Continuous spray painting.
Pneumatic tools at several workstations.
📋 Technical specifications
Power: 3 HP
Maximum pressure: 8 bar
Flow rate: 350 L/min
Speed: 1,200 r.p.m.
Air tank capacity: 80 litres
Noise level: 59 dB
Configuration: two twin-cylinder pump heads
Lubrication: oil-free
💡 Professional tip: if you are going to leave it in a fixed position, do not put it in a closed corner. Oil-free pump heads are air-cooled and need half a metre of free space around them; enclosing it in a cupboard to make it quieter is counterproductive, because the accumulated heat drives up the outlet temperature and shortens the life of the seals.
Frequently asked questions
Is it really quiet with 3 HP?
Yes, it runs at 59 dB with 350 L/min at 8 bar. It achieves this with two twin-cylinder pump heads turning at only 1,200 r.p.m., the lowest speed in the quiet range.
What jobs is it suitable for?
Bodywork and paint shops with noise limits, continuous spray painting, fixed pneumatic installations in small workshops and pneumatic tools at several workstations.
Does it need oil?
No, it is an oil-free compressor. The air comes out free of lubricant and there is no crankcase to top up.
Where can I put it?
Oil-free pump heads are air-cooled and need free space around them. Avoid enclosing it in a cupboard: the accumulated heat harms the unit.
What is the 80-litre tank for?
It is the reserve to absorb peaks in demand. The flow you can supply is set by the 350 L/min, while the 80 litres provide autonomy.
