Yellow sand 0-1 mm.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Yellow sand 0-1 mm.
Our fine yellow sand, with a granulometry of 0-1 mm, is the perfect choice to achieve professional and aesthetically attractive finishes. Its intense and homogeneous yellow color perfectly complements the yellow concrete blocks, such as those of prefabricated Adybor, providing a uniform finish and in the same tone as the blocks. Its fineness allows very small together, ideal for those meticulous and precise finishes that your project deserves.
Applications:
- Boards for concrete blocks: Its yellow and fineness tone make it perfect for joints between concrete blocks, especially those of yellow tone.
- Together for cobblestones and rustic tiles: Ideal for those rustic finishes with a uniform tone.
- Yellow mortars and concrete: Perfect for those projects where we seek to maintain a uniform yellow aesthetic in mortars and concrete.
- Mineral load for polymers: Many of our clients use it as an essential mineral load in the manufacture of polymers, highlighting its properties and tone in their projects.
Characteristics:
- Granulometry: 0-1 mm
- Color: Intense yellow
- Texture: Fine and dry
- Origin: Controlled and sustainable
Available formats:
- Big Bag: 1,000 kg
- Backs: 20 kg (on request)
Advantages:
- Color uniformity: Guarantees a uniform yellow tone in your projects.
- Reduced joints: Its fine granulometry allows very small joints, perfect for precise finishes.