Cazorla Baluster 77 cm - Ø 16 cm Round Shaft for Substantial Balustrades
Cazorla Baluster 77 cm: what it is
It's the round-shaft baluster in the Cazorla collection: 77 cm tall and Ø 16 cm maximum diameter. It's the largest-section piece in the range, used when the balustrade needs to visually anchor a long wall or a façade of some height, and a slim piece would look undersized. It's made with no internal reinforcement, so there's no steel to rust and split the shaft.
✅ Key advantages
Ø 16 cm section: the thickest shaft in the catalogue; it carries the visual weight of long walls and continuous balconies.
No internal reinforcement: nothing inside the piece to rust and split it after a few winters.
77 cm tall: with the cap and base, it reaches the usual protection heights for terraces and balconies.
19.5 kg per piece: its own weight helps stabilise the run while the mortar cures.
Classic turned profile: a traditional vase-shaped line, the most recognisable in restoration and period-style work.
🏗️ Recommended applications
Terrace and balcony fences and railings.
Plot enclosures with a masonry wall.
Outdoor staircase balustrades with a compensating wedge.
Porches, galleries and classic-style façade features.
📋 Technical data sheet
Dimensions: Ø 16 × 77 cm.
Weight per unit: 19.5 kg.
Material: precast concrete, no reinforcement.
Colour: white.
Units per pallet: 36.
Anchor: galvanised dowel, 55 × Ø 0.8 cm.
Compensating wedge: 2.5 × 11.5 × Ø 16 cm, at a 30° angle.
Use: indoor and outdoor.
🧰 Installation
Level and clean the top of the wall; on an uneven bed, a round piece rocks and there's no way to plumb it.
Set out the spacing between centres end to end before drilling anything.
Drill and fit the 55 × Ø 0.8 cm galvanised dowel at each marked point.
Bed the baluster on a pat of bonding mortar, threading it onto the dowel.
On a staircase or a sloping wall, insert the Ø 16 cm wedge to recover level on each step.
Fit the top cap and point the joints once the whole run has set.
📦 Available formats
Single unit, Ø 16 × 77 cm.
Full pallet of 36 units.
💡 Professional tip: with Ø 16 cm shafts, the costly mistake is spacing the centres too tight: more pieces than necessary get used, the gap between balusters disappears, and the balustrade ends up looking like a solid wall. Leave a gap roughly equal to the shaft's diameter and dry-fit the spacing on the wall before mixing the first bag.
Frequently Asked Questions
¿Qué diámetro tiene el fuste?
Ø 16 cm, la sección mayor de la gama.
¿Lleva armadura interior?
No, se fabrica sin armadura para evitar oxidaciones y roturas.
¿Qué clavija necesita?
La galvanizada de 55 × Ø 0,8 cm.
¿Cómo se resuelve una escalera?
Con la cuña de 2,5 × 11,5 × Ø 16 cm, que tiene un ángulo de 30º.
¿Cuántas unidades entran en un palet?
36.
¿Qué remate le corresponde?
El remate de 25 cm de ancho de la misma colección.
